Compatible With: Android 4.4 and iOS 9.0 or above.
Materials: ABS / PC
Item Type: Table/Desk Lamp
Light Source: LED
Switch Type: Touch
Size: 292.5mm (H) x 164.3mm (W)
Plug the EU charging bring into the DC port, then connect the power.
1) ON/OFF button
1. Short tap On/Off button to turn on turn off the light.
2. When the light is on, long tap the ON/OFF button to adjust the colour temperature and brightness.
More personalised settings are available in the Yeelight app.
3. When the light is on, Tap the ON/OFF button twice to activate Timer Mode.
2) More Features:
Set your own night mode in the app. The lamp will turn on automatically with cozy nightlight during the preset night mode period.
If not in the preset period, the lamp will return to the default state saved in the APP.
NOTE: The Night Mode is off by default. Please activate it in Yeelight APP.
The wireless charging indicator will flash 3 times when the lamp is connected to the power supply with its original adaptor.
Put the mobile phone in the wireless charging area. The mobile phone is charging when yellow indicator light is on. If not, please adjust the phone to the proper position.
When the phone is fully charged, the yellow indicator light is off and the wireless charging terminates.
Wireless Charging Indicator Status:
Power On: The indicator flashes 3 times
Charging: Indicator on
Charging completed or not charging: Indicator off
Error Warning: Indicator flashes quickly
Foreign Object: Indicator flashes quickly
Apple HomeKit Smart Control:
Open the Home APP in your iPhone or iPad.
Tap "Add Accessories" and follow the instructions in the app to scan the QR code in the user manual
or on the product base, or enter the 8-digit setup code above the QR code to grant the Apple Home app
- Make sure the Wi-Fi network is available and you can get access to the internet normally. - - This product is not compatible with 5Ghz networks.
- To ensure proper HomeKit compatibility, it is recommended to use iOS 9 or above;
- HomeKit codes are indicated under the base of the lamp.
How to Reset
Tap and hold the ON/OFF button, and re-insert the adaptor connector into the DC terminal till the light is breathing, and then release the ON/OFF button. *Please reset the lamp before using it in a new network environment.
- Check the voltage before using the product. Improper voltage may damage the product and cause potential safety hazards.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.
- The light will produce heat during operation. Please keep the proper ventilation.
- Using adapters other than the original one may cause product damage or safety hazards. - - Do not tilt the lamp but place it smoothly.
- Do not put battery or battery products near the wireless charging area in case of any potential safety hazard.
- For household use only.
What's in the box 1x Yeelight Staria Bedside Lamp Pro 1x DC Charging Cable & EU Charging Brick 1x Instruction Manual