LED Sensor Drawer Light - USB-C

MAIN FEATURES:
• Multiple Application Scenarios:
High-quality light designed for drawers, cabinets, wall cupboards, and the like.

• Built-in Infra-red Sensor:
Automatically turns the light on when the drawer is opened, ensuring a reliable and easy user experience, includes a user-friendly design with turn-off delay function.

• Longer Standby Time for Longer Use:
11mm ultrathin, powered by a built-in 300 mAh battery and paired with a future proof USB Type-C port for easy and convenient charging.

• Lasts 2-4 months:
With a 300mah, it can last between 2 to 4 months If used 3 times a day.

• Magnetic Plate Allows an Easy Fix:
Tear off the 3M adhesive from the iron plate, stick the iron plate on the drawer, and place the light on the iron plate.
Tear off the 3M adhesive from the iron plate, then stick the iron plate up to the drawer, the magnetically attach the light to the iron plate.

• Mode Switching:
Short Press: Auto on/off
Auto Mode: Blue Light on
Open the Drawer: Light on
Close the Drawer: Auto Turn-Off after 3s Delay

• Convenient USB Type-C Charging Port:
Charging takes only 1 hour to full charge built-in lithium battery (300mah).

SPECIFICATIONS:
• Product Name: Yeelight LED Sensor Drawer Light A6
• Model: YLCTD0O1
• Product Colour: White
• Product Size: 68mm x 26mm x 11mm
• Colour Temperature: 2700 K
• Luminous Flux: Approx.15 lm
• Rated Input: 5V DC/0.5A
• Rated Power: 0.15W
(All specifications are typical at TA and input power)
• Standby Current: 0.12 mA
• Sensing Mode: Remote Sensing
• Battery Capacity: 300mAh
• Nominal Voltage: 3.7 V
• Working Temperature: 0-45 'C
• Product Weight(g): 25 g

TIPS:
1. Stick the device on a smooth and hard surface (e.g.: ceramic, glass, wood, stainless steel, etc.)
2. Before pasting, use a clean and soft cloth to wipe the cabinet's surface dry.
It is recommended to install at 4-6 cm from the top of the drawer.
3. Do not touch the adhesive surface with your hands after the covering paper is removed.
4. Use a hair dryer to slightly heat the adhesive sheet when the temperature is lower than 10 degrees Celsius.
5. When pasting, press the magnetic sheet for 10 seconds.
6. Start to use 1 hour after the pasting.
7. Keep away from high temperature places such as electric stove and fireplace.

1x Yeelight LED Sensor Drawer Light
1x Magnetic Iron Plate with Adhesive
1x USB Type-A to USB Type-C Charging Cable
1x Instruction Manual